Setting Up Your Dreadnought's Suspension


Jump to: Fox Float X2  | EXT Storia LOK V3 |
RS Super Deluxe Ultimate | Ohlins TTX2AIR | Push Elevensix |


THE FOX FLOAT X2 PERFORMANCE ELITE SHOCK

STEP 1 (PERFORMANCE ELITE ONLY)

Turn the 2-position Compression lever to the fully OPEN mode (counter-clockwise).

STEP 2

To set the sag, push the shock o-ring all the way to the shock body and carefully sit on the bike wearing your riding kit and measure how far it has moved. For the Dreadnought, we recommend 35% sag (or 22.75mm of shaft insertion). Please reference the chart below for your recommended [air pressure] start- ing point in PSI.

As you fine tune the way your Dreadnought feels on the trail, we’d recommend making small and incremental adjustments of 2 PSI. Please use the compact digital shock pump (this was designed to fit into most back and hip packs) that came with your bike to make these adjustments on the trail.

Step 3

Turn the [red] Rebound adjusters (HSR on Performance Elite shocks only) and the [blue] Compression adjusters (HSC on Performance Elite shocks only) all the way to the closed (full clockwise) position.

The recommended settings as shown below are clicks counted from closed—use this chart to determine your baseline settings.

 

Rider Weight
(lbs)

Shock Air Pressure
(psi)

Low Speed Rebound
(LSR)

High Speed Rebound
(HSR)*

Low Speed Compression
(LSC)

High Speed Compression
(HSC)*

120-130

90

17 - 18

9 - 10

17 - 18

9 - 10

130-140

100

17 - 18

8 - 9

16 - 18

8 - 9

140-150

110

16 - 18

7 - 9

15 - 17

7 - 9

150-160

120

15 - 17

7 - 8

14 - 16

7 - 8

160-170

130

14 - 16

6 - 7

13 - 15

7 - 8

170-180

140

13 - 15

6 - 7

12 - 14

6 - 7

180-190

150

12 - 14

5 - 6

11 - 13

6 - 7

190-200

160

11 - 13

5 - 6

10 - 12

5 - 7

200-210

170

10 - 12

4 - 5

9 - 11

5 - 6

210-220

180

9 - 11

4 - 5

8 - 10

5 - 6

220-230

190

7 - 9

3 - 4

8 - 10

4 - 6

230-240

200

6 - 8

3 - 4

7 - 9

4 - 5

240-250

210

6 - 8

3 - 4

6 - 8

4 - 5

 

* Performance Elite shocks only
- Tune: CL001 JCR010
- The Float X2 comes with no volume reducer in the air canister, maximum allowable is 2 for this size shock.
- For more information on the Fox Float X2 shock.

 Back to top


THE EXT STORIA LOK V3—ENDURO RACING SHOCK

Step 1

Turn the [Lok] lock-out lever to the fully OPEN position (counter-clockwise).

STEP 2

For the Dreadnought, we recommend 35% sag (or 22.75mm of shaft insertion). Please reference the chart below for your recommended spring weight. These spring weights will provide approximately 35%.

Rider Weight (lbs)

Spring Weight
(lbs)

132 - 143

300

143 - 154

325

154 - 165

350

165 - 176

375

176 - 187

400

187 - 198

425

198 - 209

450

209 - 220

475

220 - 231

500

 

Step 3

Turn the Rebound adjuster and the Compression adjusters all the way to the closed (full clockwise) position.

The recommended settings as shown below are clicks counted from closed—use this chart to determine your baseline settings.

Rider Weight (lbs)

Spring Weight
(lbs)

Low Speed Rebound
(LSR)

Low Speed Compression 
(LSC)

High Speed Compression
(HSC)

132 - 143

300

11

12 - 13

14 - 16

143 - 154

325

10

11 - 12

13 - 15

154 - 165

350

9

9 - 10

11 - 13

165 - 176

375

8

8 - 9

10 - 12

176 - 187

400

7

7 - 9

9 - 11

187 - 198

425

6

7 - 8

8 - 10

198 - 209

450

5

6 - 7

8 - 9

209 - 220

475

3

4 - 5

7 - 9

220 - 231

500

2

3 - 4

6 - 8

 

- For more information on the EXT Storia shock.

Back to top


THE ROCKSHOX SUPER DELUXE ULTIMATE SHOCK

Step 1

Turn the lock-out lever to the fully OPEN mode (pointing towards the shock body).

Step 2

To set the sag, push the shock o-ring all the way to the shock body and carefully sit on the bike wearing your riding kit and measure how far it has moved. For the Dreadnought, we recommend 35% sag (or 22.75mm of shaft insertion). Please reference the chart below for your recommended [air pressure] start- ing point in PSI.


As you fine tune the way your Dreadnought feels on the trail, we’d recommend making small and incremental adjustments of 2 PSI. Please use the compact digital shock pump (this was designed to fit into most back and hip packs) that came with your bike to make these adjustments on the trail.

Step 3

Turn the [red] Rebound adjuster and the [black] Compression (LSC) adjuster all the way to the closed (full clockwise) position. Note that the rebound adjuster can get stiffer as you close it. For reference there should be 10 clicks from open.


The recommended settings as shown below are clicks counted from closed—use this chart to determine your baseline settings. You will notice that this shock is run with open/fast for the majority of rider weights.

 

Rider Weight
(lbs)

Shock Air Pressure
(psi)

Low Speed Compression
(LSC)

Rebound
(LSR)

120-130

80

10

10

130-140

90

10

10

140-150

100

10

10

150-160

110

9

10

160-170

120

9

9

170-180

130

8

9

180-190

140

8

9

190-200

150

7

8

200-210

160

7

8

210-220

170

7

8

220-230

180

6

7

230-240

190

6

7

240-250

200

6

6

 

- Tune: LLC
- The Super Deluxe comes with 1 volume reducer in the air canister.
- For more information on the Super Deluxe Ultimate .

 

Back to top


THE OHLINS TTX2AIR SHOCK

Step 1

Turn the HSC lever to the fully OPEN position [counter-clockwise].

Step 2



To set the sag, push the shock o-ring all the way to the shock body and carefully sit on the bike wearing your riding kit and measure how far it has moved. For the Dreadnought, we recommend 35% sag (or 22.75mm of shaft insertion). Please reference the chart below for your recommended [air pressure] start- ing point in PSI.

As you fine tune the way your Dreadnought feels on the trail, we’d recommend making small and incremental adjustments of 2 PSI. Please use the compact digital shock pump (this was designed to fit into most back and hip packs) that came with your bike to make these adjustments on the trail.

Step 3


Using a 3mm hex turn the [gold] Rebound adjuster and the [blue] Compression (LSC) adjuster all the way to the closed (full clockwise) position.

The recommended settings as shown below are clicks counted from closed—use this chart to determine your baseline settings.

 

Rider Weight
(lbs)

Shock Air Pressure
(psi)

High Speed Compression
(HSC)

Low Speed Compression
(LSC)

Rebound
(LSR)

Tune*

120 - 130

 105

OPEN 

 10

 11

C20 R10 

130 - 140

115 

 OPEN

 9

10

 C20 R10

140 - 150

125 

 OPEN

8

9

 C20 R10

150 - 160

135

OPEN

8

9

 C20 R10

160 - 170

145

OPEN 

9

10

 C20 R20

170 - 180

155

 OPEN

8

9

 C20 R20

180 - 190

165

OPEN 

8

8

 C20 R20

190 - 200

175

OPEN 

8

7

 C20 R20

200 - 210

185

OPEN 

7

6

 C20 R20

210 - 220

195

OPEN 

6

5

 C20 R20

220 - 230

205

OPEN 

6

5

C20 R20 

230 - 240

215

OPEN 

5

4

C20 R20

240 - 250

225

OPEN 

5

4

C20 R20

 

* Tune: We recommend the C20 R10 tune for riders under 160lbs (72.5kg). For riders over this weight we recommend the C20 R20.
- The TTX2Air comes with a 8,000mm3 volume reducer in the air canister.
- For more information on the TTX2Air.

 

Back to top


THE PUSH ELEVENSIX SHOCK

The PUSH ELEVENSIX has been specifically tuned to suit the kinematics and riding intent of the Dreadnought. For full details on this shock as well as useful setup guides, please follow the link to the PUSH website.

 

Back to top